Advanced dual-processor management module plus Venom nitrous metering valve (patent pending) make this system this the best you can buy!
You can custom program performance gains from 10 to 175 HP!
No need for jets, pills...no need to raise fuel pressure
Automatically stops nitrous flow if air/fuel mixture becomes too lean, minimizing risk of engine damage

Optimizes air/fuel ratio at ANY bottle pressure. The most advanced system available! The secret is in the nitrous management module that YOU can program using the software included. YOU choose the amount of nitrous injected with the click of mouse-see the 3 program modes above. Module ensures optimum air fuel ratio mixture by using existing fuel injectors and oxygen sensor. No damage to engine. No extra pressure to the regulator as with conventional systems. No too-rich mixtures resulting in fouled plugs and oil saturation. Backlit LCD driver information display constantly informs you of critical engine data: RPM, injector pulse width, throttle angle, exhaust status (rich/lean), operating mode and system status. Includes: nitrous management module, LCD display, valve and solenoid assembly with fuse, wiring harness, nitrous bottle, nitrous braided hose, mounting brackets, software, PC download cable, switch and tuning guide, installation manual. Requirements: Windows(r) 95, 98 or NT system.

CUSTOM PROGRAM 3 OPERATIONAL MODES!
Easy to use! Simply plug the management module into the service port of your PC. Then, using the software included, you can "custom tailor" the nitrous to operate in any one of 3 different ways.
1. Drag mode. Same mode as current nitrous systems. You program the amount of nitrous to be delivered to the engine at wide-open throttle
2. Linear mode. You program at what throttle angle nitrous should be introduced. The management module then adds a proportionate amount of nitrous in relation to the throttle angle. The higher the angle, the greater the nitrous flow (up to a maximum amount programmed by you). It feels like a turbo!
3. Timed mode. You program at what throttle angle nitrous should be introduced and the percentage that should be added. You also program length of time nitrous will be injected. Ideal for turbocharged engines.

Air Intake and Fuel Systems